Optimization Of Fermentation Conditions Research Articles

Improvement of nucleotide content of Cordyceps tenuipes by Schisandra chinensis: fermentation process optimization and application prospects.

Nucleotides are important components and the main indicators for judging Cordyceps quality. In this paper, the mixed fermentation process of Schisandra chinensis and Cordyceps tenuipes was systematically studied, and it was proposed that the fermentation products aqueous extract (S-ZAE) had antioxidant activity and anti-AChE ability. Herein, the results of a single factor showed that S. chinensis, yeast extract, inoculum amount, and pH had significant effects on nucleotide synthesis. The fermentation process optimization results were 3% glucose, 0.25% KH2PO4, 2.1% yeast extract, and S. chinensis 0.49% (m/v), the optimal fermentation conditions were 25℃, inoculum 5.8% (v/v), pH 3.8, 6 d. The yield of total nucleotides in the scale-up culture was 0.64 ± 0.027mg/mL, which was 10.6 times higher than before optimization. S-ZAE has good antioxidant and anti-AChE activities (IC50 0.50 ± 0.050mg/mL). This fermentation method has the advantage of industrialization, and its fermentation products have the potential to become good functional foods or natural therapeutic agents.

Functional Characterization of F3H Gene and Optimization of Dihydrokaempferol Biosynthesis in Saccharomyces cerevisiae

The 1092 bp F3H gene from Trapa bispinosa Roxb., which was named TbF3H, was cloned and it encodes 363 amino acids. Bioinformatic and phylogenetic tree analyses revealed the high homology of TbF3H with flavanone 3-hydroxylase from other plants. A functional analysis showed that TbF3H of Trapa bispinosa Roxb. encoded a functional flavanone 3-hydroxylase; it catalyzed the formation of dihydrokaempferol (DHK) from naringenin in S. cerevisiae. The promoter strengths were compared by fluorescence microscopy and flow cytometry detection of the fluorescence intensity of the reporter genes initiated by each constitutive promoter (FITC), and DHK production reached 216.7 mg/L by the promoter adjustment strategy and the optimization of fermentation conditions. The results presented in this study will contribute to elucidating DHK biosynthesis in Trapa bispinosa Roxb.

Co-fermentation and post-processing: development of a novel myrtle rice beverage, and analysis of its product characteristics

ABSTRACT To fully develop the medicinal and edible value of myrtle and improve the market visibility, myrtle berries and glutinous rice were used as raw materials and co-fermented using rice leaven. Uniform design method was used to determine the optimal fermentation conditions. The co-fermentation product was then underwent post-processing, including blending, grinding and homogenization, to produce a novel myrtle rice beverage, which was analyzed for product characteristics. Results showed that the optimal fermentation conditions were a myrtle berries of 24%, a rice leaven of 1%, a water addition amount of 100%, a fermentation temperature of 22°C, a fermentation time of 96 h. The co-fermented product was diluted 1:3 with water, ground, and homogenized with 0.1% agar and 0.2% xanthan gum to produce the final myrtle rice beverage. The beverage boasts a low sugar and alcohol content, along with a moderate level of acidity, making it a healthy beverage with antioxidant properties.

Optimization of fermentation conditions for the production of γ-aminobutyric acid by Lactobacillus hilgardii GZ2 from traditional Chinese fermented beverage system.

γ-Aminobutyric acid (GABA) is a crucial neurotransmitter with wide application prospects. In this study, we focused on a GABA-producing strain from a traditional Chinese fermented beverage system. Among the six isolates, Lactobacillus hilgardii GZ2 exhibited the greatest ability to produce GABA in the traditional Chinese fermented beverage system. To increase GABA production, we optimized carbon sources, nitrogen sources, temperature, pH, and monosodium glutamate and glucose concentrations and conducted fed-batch fermentation. The best carbon and nitrogen sources for GABA production and cell growth were glucose, yeast extract and tryptone. Gradual increases in GABA were observed as the glucose and monosodium glutamate concentrations increased from 10g/L to 50g/L. During fed-batch fermentation, lactic acid was used to maintain the pH at 5.56, and after feeding with 0.03g/mL glucose and 0.4g/mL sodium glutamate for 72h, the GABA yield reached 239g/L. This novel high-GABA-producing strain holds great potential for the industrial production of GABA, as well as the development of health-promoting functional foods and medical fields.

Optimization of fermentation process and characterization of non-alcoholic functional beverage from pigmented rice varieties

Traditional foods have recently gained importance because of their role in the United Nations’ sustainable development goals (SDG), ensuring health benefits and economic development. Fermented rice water (FRW) is a popular traditional drink among low socio-economic groups, especially in Southeast Asia. This study focused on optimizing fermentation conditions for sustainable food production and consumption of FRW using pigmented rice, followed by analyzing the nutritional, physicochemical and phytochemical properties. Fermenting cooked rice in water for 16 h at 37 °C produced bubbles, mild sourness and zero alcohol content. Flavors and sugar were added to optimized FRW as food additives to enhance palatability. Nutritional profiling showed that black flavored fermented rice water (FFRW) had the highest protein (0.06%), carbohydrate (13.25 g/100 mL) and calorific value (78.09 kcal/100 mL). However, brown FFRW had the highest vitamin B3 (3.12 mg/L) and mineral content. Phenolic and antioxidant activity was highest in black FFRW, followed by red and brown, with maximum bio-accessibility of polyphenols found in black FFRW (75.25%). All FFRW were microbiologically safe and stable during a storage period of 30 days at 4 °C. All FRW had >8 log CFU count, with black FFRW having the highest LAB count, indicating their possible probiotic potential in addressing malnutrition and undernourishment. Thus, FFRW holds the potential to be commercialized in the food and beverage sector due to its rich nutritional and functional properties. Furthermore, the consumption of FFRW will preserve traditional knowledge, ensure sustainable livelihoods and contribute to achieving development goals.

Promising Application, Efficient Production, and Genetic Basis of Mannosylerythritol Lipids

Mannosylerythritol lipids (MELs) are a class of glycolipids that have been receiving increasing attention in recent years due to their diverse biological activities. MELs are produced by certain fungi and display a range of bioactivities, making them attractive candidates for various applications in medicine, agriculture, and biotechnology. Despite their remarkable qualities, industrial-scale production of MELs remains a challenge for fungal strains. Excellent fungal strains and fermentation processes are essential for the efficient production of MELs, so efforts have been made to improve the fermentation yield by screening high-yielding strains, optimizing fermentation conditions, and improving product purification processes. The availability of the genome sequence is pivotal for elucidating the genetic basis of fungal MEL biosynthesis. This review aims to shed light on the applications of MELs and provide insights into the genetic basis for efficient MEL production. Additionally, this review offers new perspectives on optimizing MEL production, contributing to the advancement of sustainable biosurfactant technologies.

High production of ectoine from methane in genetically engineered Methylomicrobium alcaliphilum 20Z by preventing ectoine degradation

BackgroundMethane is a greenhouse gas with a significant potential to contribute to global warming. The biological conversion of methane to ectoine using methanotrophs represents an environmentally and economically beneficial technology, combining the reduction of methane that would otherwise be combusted and released into the atmosphere with the production of value-added products.ResultsIn this study, high ectoine production was achieved using genetically engineered Methylomicrobium alcaliphilum 20Z, a methanotrophic ectoine-producing bacterium, by knocking out doeA, which encodes a putative ectoine hydrolase, resulting in complete inhibition of ectoine degradation. Ectoine was confirmed to be degraded by doeA to N-α-acetyl-L-2,4-diaminobutyrate under nitrogen depletion conditions. Optimal copper and nitrogen concentrations enhanced biomass and ectoine production, respectively. Under optimal fed-batch fermentation conditions, ectoine production proportionate with biomass production was achieved, resulting in 1.0 g/L of ectoine with 16 g/L of biomass. Upon applying a hyperosmotic shock after high–cell–density culture, 1.5 g/L of ectoine was obtained without further cell growth from methane.ConclusionsThis study suggests the optimization of a method for the high production of ectoine from methane by preventing ectoine degradation. To our knowledge, the final titer of ectoine obtained by M. alcaliphilum 20ZDP3 was the highest in the ectoine production from methane to date. This is the first study to propose ectoine production from methane applying high cell density culture by preventing ectoine degradation.

Bacillus velezensis strain NA16 shows high poultry feather-degrading efficiency, protease and amino acid production

Isolated Bacillus velezensis strain NA16, which produces proteases, amino acids and the transcription levels of different keratinolytic enzymes and disulfide reductase genes in whole gene sequencing, was evaluated during feather degradation. The result shows under optimum fermentation conditions, chicken feather fermentation showed total amino acid concentration of 7599 mg/L, degradation efficiency of 99.3% at 72 h, and protease activity of 1058 U/mL and keratinase activity of 288 U/mL at 48 h. Goose feather fermentation showed total amino acid concentration of 4918 mg/L (96 h), and degradation efficiency was 98.9% at 120 h. Chicken feather fermentation broth at 72 h showed high levels of 17 amino acids, particularly phenylalanine (1050 ± 1.90 mg/L), valine (960 ± 1.04 mg/L), and glutamic (950 ± 3.00 mg/L). Scanning electron microscopy and Fourier transform infrared analysis revealed the essential role of peptide bond cleavage in structural changes and degradation of feathers. Protein purification and zymographic analyses revealed a key role in feather degradation of the 39-kDa protein encoded by gene1031, identified as an S8 family serine peptidase. Whole genome sequencing of NA16 revealed 26 metalloproteinase genes and 22 serine protease genes. Among the proteins, S8 family serine peptidase (gene1031, gene1428) and S9 family peptidase (gene3132) were shown by transcription analysis to play major roles in chicken feather degradation. These findings revealed the transcription levels of different families of keratinolytic enzymes in the degradation of feather keratin by microorganisms, and suggested potential applications of NA16 in feather waste management and amino acid production.

Effects of Fermentation Temperature and Time on Chickpea-Initiated Sourdough Production

Chickpea is a nutritious staple pulse with numerous consumption patterns. It is also used in bakery products, especially in bread, in chickpea flour, fermented-chickpea liquor (FCL), and chickpea yeast (FCL-fermented sourdough) in various countries. However, a large variation exists in the traditional fermentation of FCL and chickpea yeast (CY). In this study, fermentation parameters (cracked-chickpea size, water-chickpea ratio, fermentation temperature, and fermentation time) for the production of FCL and CY were sequentially optimized through separate RSM designs. Therefore, this study aimed to optimise the fermentation conditions for preparing both FCL and CY. First, FCL production parameters of fermentation temperature, time, chickpea particle size, and water-chickpea ratio were optimized and determined to be 40°C, 26 h, 2-6 mm, and 4:1 ratio, respectively. Secondly, the CY process parameters (fermentation temperature and time) were optimized using the optimized FCL conditions and determined to be 38°C and 9 h. The validation studies proved no statistical difference (p>0.05) between the RSM-model predicted and experimental responses. At the optimized fermentation conditions, the FCL and CY had pH values of 4.44 and 4.31 and LAB counts of 9.87 and 9.08 log cfu/g. The optimum fermentation conditions determined in this study are somewhat comparable to those commonly employed in the traditional preparations of both FCL and CY. Such optimization could lead to the better utilization of FCL and CY in the food industry and improved consumer health outcomes.

High-level production of chitinase by multi-strategy combination optimization in Bacillus licheniformis.

In view of the extensive potential applications of chitinase (ChiA) in various fields such as agriculture, environmental protection, medicine, and biotechnology, the development of a high-yielding strain capable of producing chitinase with enhanced activity holds significant importance. The objective of this study was to utilize the extracellular chitinase from Bacillus thuringiensis as the target, and Bacillus licheniformis as the expression host to achieve heterologous expression of ChiA with enhanced activity. Initially, through structural analysis and molecular dynamics simulation, we identified key amino acids to improve the enzymatic performance of chitinase, and the specific activity of chitinase mutant D116N/E118N was 48% higher than that of the natural enzyme, with concomitant enhancements in thermostability and pH stability. Subsequently, the expression elements of ChiA(D116N/E118N) were screened and modified in Bacillus licheniformis, resulting in extracellular ChiA activity reached 89.31 U/mL. Further efforts involved the successful knockout of extracellular protease genes aprE, bprA and epr, along with the gene clusters involved in the synthesis of by-products such as bacitracin and lichenin from Bacillus licheniformis. This led to the development of a recombinant strain, DW2△abelA, which exhibited a remarkable improvement in chitinase activity, reaching 145.56 U/mL. To further improve chitinase activity, a chitinase expression frame was integrated into the genome of DW2△abelA, resulting in a significant increas to 180.26 U/mL. Optimization of fermentation conditions and medium components further boosted shake flask enzyme activity shake flask enzyme activity, achieving 200.28 U/mL, while scale-up fermentation experiments yielded an impressive enzyme activity of 338.79 U/mL. Through host genetic modification, expression optimization and fermentation optimization, a high-yielding ChiA strain was successfully constructed, which will provide a solid foundation for the extracellular production of ChiA.

Uniform experimental design optimization of liquid fermentation Baijiu mixed fermentation

In this study, corn alcohol fermentation mash was used as raw material, and different microorganisms were added to improve the flavor of liquid fermentation Baijiu. The optimum fermentation conditions of liquid fermentation Baijiu were optimized by uniform experimental design. The optimum fermentation conditions were as follows: Saccharomyces cerevisiae: non-Saccharomyces cerevisiae=3.8:1, yeast inoculation amount was 0.65 g/g, Lactobacillus inoculation amount was 1%, yeast inoculation time was 26.5 h, Lactobacillus inoculation time was 0.5 h, the total acid content was 1.943 g/L, the estimated total acid yield was 2.036 g/L, and the relative deviation was 0.077%. Compared with the three control groups, the total acid yield increased by 27.39%, 12.36% and 19.05% respectively.

Isolation and characterization of Stenotrophomonas pavanii GXUN74707 with efficient flocculation performance and application in wastewater treatment.

The identification of microorganisms with excellent flocculants-producing capability and optimization of the fermentation process are necessary for the wide-scale application of bioflocculants. Therefore, we isolated and identified a highly efficient flocculation performance strain of Stenotrophomonas pavanii GXUN74707 from the sludge. The optimal fermentation and flocculation conditions of strain S. pavanii GXUN74707 was in fermentation medium with glucose and urea as the carbon and nitrogen sources, respectively, at pH 7.0 for 36 h, which treatment of kaolin suspension with 0.5 mL of the fermentation broth resulted in a flocculation rate of 99.0%. The bioflocculant synthesized by strain S. pavanii GXUN74707 was found mainly in the supernatant of the fermentation broth. Chemical analysis revealed that the pure bioflocculant consisted of 79.70% carbohydrates and 14.38% proteins. The monosaccharide components of MBF-GXUN74707 are mainly mannose (5.96 μg/mg), galactose (1.86 μg/mg), and glucose (1.73 μg/mg). Infrared spectrometric analysis showed the presence of carboxyl (COO-), hydroxyl (-OH) groups. The SEM images showed clumps of rod-shaped bacteria with adhesion of extracellular products. Furthermore, the strain decolored dye wastewater containing direct black, direct blue, and Congo red by 89.2%, 95.1%, 94.1%, respectively. The chemical oxygen demand (COD) and biological oxygen demand (BOD) removal rates after treatment of aquaculture wastewater with the fermentation broth were 68% and 23%, respectively. This study is the first to report the performance and application of strain Stenotrophomonas pavanii in wastewater flocculation. The results indicate that strain S. pavanii is a good candidate for the production novel bioflocculants and demonstrates its potential industrial practicality in biotechnology processes.

Screening of a Saccharomyces cerevisiae Strain with High 3-Methylthio-1-Propanol Yield and Optimization of Its Fermentation Conditions.

3-Methylthio-1-propanol (3-Met) is an important flavor compound in various alcoholic beverages such as Baijiu and Huangjiu. To maintain the content of 3-Met in these alcoholic beverages, it is necessary to screen a micro-organism with high yield of 3-Met from the brewing environment. In this study, the ability of yeast strains from the Baijiu brewing to produce 3-Met was analyzed, aiming to obtain yeast with high-yield 3-Met, and its fermentation conditions were optimized. Firstly, 39 yeast strains were screened using 3-Met conversion medium. The results showed that the majority of the strains from Baijiu brewing sources could produce 3-Met, and nearly half of the strains produced more than 0.5 g/L of 3-Met. Among these, yeast F10404, Y03401, and Y8#01, produced more than 1.0 g/L of 3-Met, with yeast Y03401 producing the highest amount at 1.30 g/L. Through morphological observation, physiological and biochemical analysis, and molecular biological identification, it was confirmed that yeast Y03401 was a Saccharomyces cerevisiae. Subsequently, the optimal fermentation conditions for 3-Met production by this yeast were obtained through single-factor designs, Plackett-Burman test, steepest ascent path design and response surface methodology. When the glucose concentration was 60 g/L, yeast extract concentration was 0.8 g/L, L-methionine concentration was 3.8 g/L, initial pH was 4, incubation time was 63 h, inoculum size was 1.6%, shaking speed was 150 rpm, loading volume was 50 mL/250 mL, and temperature was 26 °C, the content of 3-Met produced by S. cerevisiae Y03401 reached a high level of 3.66 g/L. It was also noteworthy that, in contrast to other study findings, this yeast was able to create substantial amounts of 3-Met even in the absence of L-methionine precursor. Based on the clear genome of S. cerevisiae and its characteristics in 3-Met production, S. cerevisiae Y03401 had broad prospects for application in alcoholic beverages such as Baijiu.

Optimization of the fermentation media and growth conditions of Bacillus velezensis BHZ-29 using a Plackett-Burman design experiment combined with response surface methodology.

Bacillus velezensis occurs extensively in the soil environment. It produces a range of antimicrobial compounds that play an important role in the field of biological control. However, during the actual application process it is often affected by factors such as the medium formulation and fermentation conditions, and therefore biocontrol measures often do not achieve their expected outcomes. In this study, the B. velezensis BHZ-29 strain was used as the research object. The carbon and nitrogen sources, and inorganic salts that affect the number of viable bacteria and antibacterial potency of B. velezensis BHZ-29, were screened by a single factor test. A Plackett-Burman design experiment was conducted to determine the significant factors affecting the number of viable bacteria and antibacterial potency, and a Box-Behnken design experiment was used to obtain the optimal growth of B. velezensis BHZ-29. The medium formula that produced the highest number of viable bacteria and most antibacterial substances was determined. The initial pH, temperature, amount of inoculant, liquid volume, shaking speed, and culture time were determined by a single factor test. The factors that had a significant influence on the number of viable bacteria of B. velezensis BHZ-29 were selected by an orthogonal test. A Box-Behnken design experiment was conducted to obtain the optimal fermentation conditions, and highest number of viable bacteria and antibacterial titer. Molasses, peptone, and magnesium sulfate had significant effects on the viable count and antibacterial titer of B. velezensis BHZ-29. The viable count of B. velezensis BHZ-29 increased from 7.83 × 109 to 2.17 × 1010 CFU/mL, and the antibacterial titer increased from 111.67 to 153.13 mm/mL when the optimal media were used. The optimal fermentation conditions for B. velezensis BHZ-29 were as follows: temperature 25.57°C, pH 7.23, culture time 95.90 h, rotation speed 160 rpm, amount of inoculant 2%, and liquid volume 100 ml. After the optimization of fermentation conditions, the number of viable bacteria increased to 3.39 × 1010 CFU/mL, and the bacteriostatic titer increased to 158.85 mm/ml.The plant height and leaf number of cotton plants treated with BHZ-29 fermentation broth were higher than those of cotton inoculated with Verticillium dahliae. The number of bacteria was 1.15 × 107 CFU/g, and the number of fungi was 1.60 × 105 spores/g. The disease index of the cotton seedlings treated with the optimized fermentation broth was 2.2, and a control effect of 93.8% was achieved. B. velezensis BHZ-29 could reduce the disease index of cotton Verticillium wilt and had a controlling effect on the disease. The best effect was achieved in the treatment group with an inoculation concentration of 2 × 108 CFU/ml, the disease index was 14.50, and a control effect of 84.18% was achieved. The fermentation process parameters of the number of viable bacteria and antibacterial titer by strain B. velezensis BHZ-29 were optimized to lay a foundation for the practical production and application of strain B. velezensis BHZ-29 in agriculture.

Production of Bioethanol Based on Eichhornia crassipes Combined with the Pulp of the Ripe Fruit of Azadirachta indica

The management of invasive plants such as Eichhornia crassipes and the fruits of Azadirachta indica on the banks of the waters of Lake Chad in the Far North of Cameroon remains a challenge to overcome. On the other hand, given the urgency of finding other sources of energy following the scarcity of fossil fuels, it becomes appropriate to turn to renewable energies obtained from lignocellulosic biomasses which constitute an opportunity to be seized as cooking energy. The objective of this study is to determine the ethanoic potential of the biomass of Eichhornia crassipes associated with the pulp of Azadirachta indica. Thus, the production of bioethanol from the biomass of Eichhornia crassipes associated with the pulp of Azadirachta indica was done by biochemical route which results in: physical pretreatment of the raw material, thermo-mechanical pre-hydrolysis chemical, alcoholic fermentation with Lactobacillus fermentum yeast in batch mode and distillation. Measuring the pH and volatile fatty acid (VFA) content in different fermented samples made it possible to determine the optimal conditions for better fermentation. During 135 hours of fermentation, with 1281.25±1.09 ml of initial raw material fermented, it was possible to obtain on average 675.47±1.02 ml/g of hydrated ethanol and 640.62 ±5.07 ml/g of CO2 with an average weight yield of 52.72±3.57%. Thanks to a yeast contribution of 2.5% relative to the dry matter and an L/S ratio = 20, the dosage of the distillate obtained after distillation of the fermented must by the chronometric method made it possible to determine the ethanoic concentration of the solutions studied which is on average 0.94±0.01%V/V of distillate per fermented biomass.

Application of exopolysaccharides synthesized by Xanthomonas campestris in an efficient separation system of refractory chalcopyrite and molybdenite

Bacterial polysaccharides get an abundance of attention owing to their distinctive biological activity and promising applications. Recent research found that the specificity of the molecular structure of exopolysaccharides (EPS) can be used to accomplish selective regulation of the physicochemical properties of mineral surfaces. The development and application of novel microbial EPS as a flotation reagent for chalcopyrite and molybdenite separation possesses a promising development prospect. Consequently, we attempted to create effective and sustainable molybdenite depressants in this work by optimizing the strain's fermentation settings and identifying the molecular structure of the generated EPS. Fermentation condition tests revealed patterns of influence of fermentation parameters on EPS yield, the viscosity average molecular weight, and biomass during the fermentation process, and optimized the optimal fermentation conditions. Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR), and ion chromatography (IC) analyses clarified the structure of the EPS in terms of monosaccharide composition, glycosidic bonding, and functional groups. Mixed mineral flotation tests proved that a low dosage of polysaccharide reagent (100 mg/L) at pH 10 effectively inhibited molybdenite and achieved separation targets of 21.96% Cu and 2.63% Mo in the concentrate, with separation efficiencies (SE) of 72.67% and 55.78% for Cu and Mo, respectively.

Continuous Secretion of Human Epidermal Growth Factor Based on Escherichia coli Biofilm

Human epidermal growth factor (hEGF) holds significant importance in the fields of medicine and cosmetics. Therefore, it becomes imperative to develop a highly efficient fermentation system for hEGF production. In this study, a stable hEGF-secreting expression strain was created by integrating the hEGF gene into the genome of Escherichia coli (E. coli) BL21, and an immobilized fermentation system was developed based on biofilm to facilitate continuous hEGF production. After optimization of fermentation conditions and gene dosage, the production of hEGF was increased from 13.9 mg/L to 52.4 mg/L in free-cell fermentation. Moreover, genetic modifications targeting dgcC, csgD, bcsA, and bcsB proved to enhance biofilm formation. When the bcsB was overexpressed in BL21-hEGF-C5, the biofilm-forming ability was enhanced by 91.1% and the production of hEGF was increased by 28% in biofilm-immobilized continuous fermentation. In conclusion, this study successfully confirms the feasibility of continuous hEGF production through the biofilm system of E. coli, providing valuable insights for the development of other proteins in the field of continuous biomanufacturing.

The effects of environmental factors on the synthesis of water-soluble Monascus red pigments via submerged fermentation: a review.

Monascus pigments (MPs) have been used as natural food pigments for many years. There is a high demand for Monascus red pigments (MRPs) to enhance color and for antibacterial and cancer-prevention therapies in food and medicine. Most of MRPs aren't water-soluble, and the yield of water-soluble MRPs is naturally low. But on the other hand, water-soluble MRP is more cost-effective for application in industrial mass production. Therefore, it's important to improve the yield of water-soluble MRPs. Environmental factors have significant influence on the synthesis of water-soluble MRPs, which is crucial for the development of industrial production of water-soluble MRPs. This review introduces the biosynthetic pathways of water-soluble MRPs and summarizes the effects of environmental factors on the yield of water-soluble MRPs. Acetyl coenzyme A (acetyl-CoA) is a precursor for MPs synthesis. The carbon and nitrogen sources and the carbon/nitrogen ratio can impact MPs production by regulating the metabolic pathway of acetyl-CoA. Optimization of fermentation conditions to change the morphology of Monascus can stimulate the synthesis of MPs. The appropriate choice of nitrogen sources and pH values can promote the synthesis of MRPs from MPs. Additives such as metal ions and non-ionic surfactants can affect the fluidity of Monascus cell membrane and promote the transformation of MRPs into water-soluble MRPs. This review will lay the foundation for the industrial production of water-soluble MRPs. This article is protected by copyright. All rights reserved.

Optimization of fermentation conditions and medium components for chrysomycin a production by Streptomyces sp. 891-B6

BackgroundChrysomycin A (CA) is a promising antibiotic for treatment of Gram-positive bacterial infections and cancers. In order to enhance CA yield, optimization of fermentation conditions and medium components was carried out on strain Streptomyces sp. 891-B6, an UV-induced mutant with improved CA titer compared with its wide-type marine strain 891.ResultsUsing one-way experiment, the optimal fermentation conditions for CA production in 1-L shake flask were obtained as follows: 12 days of fermentation time, 5 days of seed age, 5% of inoculum volume ratio, 200 mL of loading volume and 6.5 of initial pH. By response surface methodology, the optimal medium components determined as glucose (39.283 g/L), corn starch (20.662 g/L), soybean meal (15.480 g/L) and CaCO3 (2.000 g/L).ConclusionValidation tests showed that the maximum yield of CA reached 1601.9 ± 56.7 mg/L, which was a 60% increase compared to the initial yield (952.3 ± 53.2 mg/L). These results provided an important basis for scale-up production of CA by strain 891-B6.

Bioethanol production from sugarcane molasses by co-fermentation of Saccharomyces cerevisiae isolate TA2 and Wickerhamomyces anomalus isolate HCJ2F-19

PurposeCo-culturing is a widely used method to improve bioethanol production from biomass enriched in fermentable sugars. This study aims to produce bioethanol from sugarcane molasses by simultaneous co-fermentation of S. cerevisiae isolate TA2 and W. anomalus isolate HCJ2F-19.MethodsResponse surface methodology (RSM) based on the central composite design (CCD) was employed to optimize fermentation conditions, including mixing rate (110–150 rpm), temperature (25–35 °C), molasses concentration (25–35 obrix), and incubation time (36–72 h). The ethanol concentration was analyzed using HPLC equipped with a UV detector.ResultsThe monocultureS. cerevisiae isolate TA2 produced 17.2 g.L−1 of ethanol, 0.33 g.g−1 of ethanol yield, and 0.36 g.L−1.h−1 of productivity compared to W. anomalus isolate HCJ2F that produced 14.5 g.L−1, 0.30 g.g−1 and 0.28 g.L−1.h−1 ethanol, ethanol yield, and productivity under laboratory conditions, respectively. In comparison to single cultures of S. cerevisiae TA2 and W. anomalus HCJ2F, the co-fermentation using both isolates showed an increased ethanol yield of 29% and 53% compared to the single species fermentations, respectively. The results showed that the growth of W. anomalus HCJ2F-19 and S. cerevisiae TA2 was not influenced by each other during the co-fermentation process. The one variable at a time optimization (OVAT) analysis resulted in an ethanol concentration of 26.5 g.L−1 with a specific yield and productivity of 0.46 g.g−1, 0.55 g.L−1.h−1, respectively, at pH 5.5, 25 obrix, 48 h, 150 rpm, 30 °C, 60:40 inoculum ratio, and 10% overall inoculum size. The maximum ethanol concentration of 35.5 g.L−1 was obtained by co-fermentation using the RSM-CCD tool at 30 obrix, 30 °C, 54 h, and 130 rpm.ConclusionThe results suggested that the co-fermentation of S. cerevisiae isolate TA2 and W. anomalus isolate HCJ2F improves bioethanol production from sugar cane molasses under optimum fermentation conditions.